H3C S3610 Series Operation Manual page 8

Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
HWTACACS scheme view
Public key view
Public key editing view
Routing policy view
Basic IPv4 ACL view
Advanced IPv4 ACL view
Ethernet frame header ACL view
User-defined ACL view
Basic IPv6 ACL view
Advanced IPv6 ACL view
QinQ view
RADIUS scheme view
RIP view
RIPng view
ISP domain view
<omitted>
Table 1-5 lists information about CLI views (including the operations you can performed
in these views, how to enter these views, and so on).
Table 1-5 CLI views
View
User view
System
view
Ethernet
port view
Available Prompt
operation example
Display
operation
status and <Sysname>
statistical
information
Configure
system [Sysname]
parameters
[Sysname-
Ethernet1/0/1]
Configure
Ethernet
port
parameters
[Sysname-
GigabitEthernet
1/0/1]
1-6
Chapter 1 Basic Configurations
Enter method Quit method
Execute the quit
Enter user view command
once logging user view to log
out
into the switch.
switch.
Execute the quit
Execute the
or
system-view
command
command in
return to user
user view.
view.
Ethernet port
view
Execute the
Execute the quit
interface
command
Ethernet 1/1/1
return to system
command in
view.
system view.
Execute
Gigabit Ethernet
return
port view
command
return to user
Execute the
view.
interface
GigabitEtherne
t 1/1/1 command
in system view.
in
of the
return
to
to
the
to