Cli Views - H3C S3610 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
Key
Right-arrow key
or <Ctrl+F>
Up-arrow key or
<Ctrl+P>
Down-arrow key
or <Ctrl+N>
Tab key

1.1.7 CLI Views

CLI views are designed for different configuration tasks. They are interrelated. You will
enter user view once you log into a switch successfully, where you can perform
operations such as displaying operation status and statistical information. And by
executing the system-view command, you can enter system view, where you can
enter other views by executing the corresponding commands.
The following CLI views are provided:
User view
System view
Ethernet port view
NULL interface view
VLAN view
VLAN interface view
Loopback interface view
Tunnel interface view
Local user view
User interface view
FTP client view
MST region view
IGMP-Snooping view
MLD-Snooping view
Traffic classifier view
Traffic behavior view
QoS policy view
Cluster view
Port group view
NQA view
The cursor moves one character space to the right, and the
alarm rings when the cursor gets to end of the command line.
Display history command
Pressing <Tab> after entering part of a keyword enables the
fuzzy help function. If finding a unique match, the system will
substitute the complete keyword for the incomplete one and
display it in the next line. If there are several matches or no
match at all, the system will not modify the incomplete keyword
and display it again in the next line.
1-5
Chapter 1 Basic Configurations
Function