H3C S3610 Series Operation Manual page 4

Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
1) Enter <?> in any view to access all the commands in this view and brief description
about them as well.
<Sysname> ?
User view commands:
backup
boot-loader
bootrom
cd
clock
cluster
copy
debugging
delete
dir
display
<omitted>
2) Enter a command and a <?> separated by a space. If <?> is at the position of a
keyword, all the keywords are given with a brief description.
<Sysname> language-mode ?
chinese
english
3) Enter a command and a <?> separated by a space. If <?> is at the position of a
parameter, the description about these parameters is given.
<Sysname> system-view
[Sysname] interface Vlan-interface ?
<1-4094>
[Sysname] interface Vlan-interface 1 ?
<cr>
[Sysname] interface Vlan-interface 1
Where, <cr> indicates that there is no parameter at this position. The command is then
repeated in the next command line and executed if <Enter> is input.
4) Enter a character string followed by a <?>. All the commands starting with this
string are displayed.
<Sysname> pi?
ping
5) Enter a command followed by a character string and <?>. All the keywords starting
with this string are listed.
<Sysname> display ver?
version
6) Press <tab> after entering the first several letters of a keyword to display the
complete keyword, provided these letters can uniquely identify the keyword in this
command.
Backup next startup-configuration file to TFTP server
Set boot loader
Update/read/backup/restore bootrom
Change current directory
Specify the system clock
Run cluster command
Copy from one file to another
Enable system debugging functions
Delete a file
List files on a file system
Show running system information
Chinese environment
English environment
VLAN interface
1-2
Chapter 1 Basic Configurations