Plugging The Board Into The Slot; Closing The Pc; Fig. 5-2: Inserting The Board; Fig. 5-3: Fastening The Board At The Back Cover - Addi-Data APCI-2032 Technical Description

APCI-1032, APCI-1564 and APCI-2032
5.3

Plugging the board into the slot

♦ Insert the board vertically into the chosen slot.
♦ Fasten the board to the rear of the PC housing with the screw which was fixed on
the back cover.
♦ Tighten all the loosen screws.
5.4

Closing the PC

♦ Close your PC as described in the manual of the PC manufacturer.
26

Fig. 5-2: Inserting the board

Fig. 5-3: Fastening the board at the back cover

Installation of the board