APCI-1032, APCI-1564 and APCI-2032
INPUT 1/5
INPUT 0/4
MODUS2, MODUS1
MODUS2, MODUS1
0,0
0,0
1,0
0,0
0,1
0,0
1,1
0,0
0,0
1,0
1,0
1,0
0,1
1,0
1,1
1,0
0,0
0,1
1,0
0,1
0,1
0,1
1,1
0,1
0,0
1,1
1,0
1,1
0,1
1,1
1,1
1,1
* 10: Interrupt source: the 2
** 01: Interrupt source: the 1
In case both IRQ modes (Modus_1 and Modus_2) are set for one channel, this channel
reacts according to the OR logic and is linked with the other inputs through an AND logic.
Fig. 8-8: OR and AND logic combination by AND logic
Modus_1 and Modus_2 are set to 1 for the channel 0/4. It reacts either to Low or to
High level (OR logic).
To generate an interrupt, the former condition and the condition set on channel 1/5
(High level) are to be fulfilled (AND logic).
The AND and OR logics are the same when both modes are activated on all selected
interruptible inputs.
Table 8-2: Principle of the AND logic (for 2 channels)
Input 0/4
Input 1/5
No interrupt
nd
input (channel 1/5) has generated an interrupt.
st
input (channel 0/4) has generated an interrupt.
10*
10
10
10
01**
10
01
01 10
01
01
10
01 10
01
01
01
10
10
01
01 10
01 10
Functions of the board
10
10
10
10
01
10
10
01
10
01 10
01
01
01
01
01
10
10 01
01
10 01
01 10
49