Software Samples; Table 9-4: Supported Software Samples For The Apci-1564 - Addi-Data APCI-2032 Technical Description

APCI-1032, APCI-1564 and APCI-2032

9.2.2 Software samples

Table 9-4: Supported software samples for the APCI-1564

Functionality
SAMPLE01
SAMPLE02
Digital
SAMPLE03
inputs
SAMPLE04
SAMPLE05
SAMPLE06
SAMPLE07
SAMPLE01
Digital
SAMPLE02
outputs
SAMPLE03
SAMPLE04
SAMPLE05
SAMPLE06
SAMPLE07
SAMPLE01
Watchdog
SAMPLE05
SAMPLE01
Timer
SAMPLE02
SAMPLE03
SAMPLE04
SAMPLE01
Counter
SAMPLE02
Sample number
Read 1 digital input
Read 2 digital inputs
Read 4 digital inputs
Read 8 digital inputs
Read 16 digital inputs
Read 32 digital inputs
Test the interrupt of all inputs
Test 1 digital output with/without output memory
Test 2 digital outputs with/without output memory
Test 4 digital outputs with/without output memory
Test 8 digital outputs with/without output memory
Test 16 digital outputs with/without output memory
Test 32 digital outputs with/without output memory
Test the interrupt of all digital outputs (short circuit,
ϑ -diagnostic or V
b_ADDIDATA_GetWatchdogInformation is used.
Initialise and release software-trigger at key stroke. Start 1
watchdog. Read status, once the watchdog has run down.
Reset the watchdog and quit the program.
b_ADDIDATA_GetWatchdogInformationEx is used.
Initialise and release software-trigger at key stroke. Start 1
watchdog. Read status, once the watchdog has run down.
Reset the watchdog and quit the program.
Initialise 1 timer in mode 2 without interrupt, start the timer.
Read the timer value.
Initialise 1 timer in mode 2 with interrupt, start the timer.
Read the timer value. When an interrupt occurs, stop the timer
and quit the program.
Initialise 1 timer in mode 2 without interrupt. The timer can
be triggered at keystroke.
Initialise 1 timer in mode 2 with interrupt. The timer can be
triggered at keystroke.
Initialise 1 counter without interrupt
Initialise 1 counter with interrupt
Description
-diagnostic)
cc
Standard software
59