History; Further Information - Siemens SITRANS F MAG 8000 Standard Operating Instructions Manual

Introduction

1.3 Further Information

Figure 1-1
1.2

History

The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to each
previous edition.
Edition
11/2018
05/2014
10/2012
03/2010
1.3 Further Information
Product information on the Internet
The Operating Instructions are available on the documentation disk shipped with the device,
and on the Internet on the Siemens homepage, where further information on the range of
SITRANS F flowmeters may also be found:
Product information on the internet (http://www.siemens.com/flowdocumentation)
Worldwide contact person
If you need more information or have particular problems not covered sufficiently by these
Operating Instructions, get in touch with your contact person. You can find contact information
for your local contact person on the Internet:
8
SITRANS F M MAG 8000 CT
M17
Siemens AG, DE-76181 Karlsruhe
Made in France
MAG 8000 CT nameplate example
Remarks
● Update for software version 3.09
● Technical data and Appendix C.2 updated
● NMI M 10 approval for MAG 8000 Irrigation
● Primary operation software changed from Flow Tool to PDM (Flow Tool moved to
appendix)
● Qualification Certificate functionality added
● Integration of MAG 8000 for irrigation applications
● Restructuring of the document
0200
Operating Instructions, 11/2018, A5E03071515-AE
SITRANS MAG 8000