Siemens SITRANS F MAG 8000 Standard Operating Instructions Manual page 98

Technical data
10.6 Output characteristics
Output B as call-up output
①
②
③
④
When output B is configured as "call-up", the output is activated by an alarm condition and
remains on until it is reset via meter display key or communication interface.
A new alarm will not activate a "call-up" function if the "call-up" function is still active from a
previous alarm.
Note
Like alarm output, call-up output inverts to a pulse output providing a call-up if power
disappears or cable connection is interrupted.
MAG 8000
When output B is configured as an "call-up" output, it will follow the internal alarms that were
previously chosen in the Alarm Configuration List.
Note
Call-up output is inverted to a pulse output providing an alarm if power disappears or cable
connection is interrupted.
Factory regional settings
DN
mm
25, 40, 50
65, 80, 100, 125, 150
200, 250, 300, 350,
400, 450, 500
600, 700, 800, 900,
1000, 1050, 1100, 1200
98
Call up output
Call up reset
Call up status
On - Off
size
(inch)
(1", 1½", 2")
(2½", 3", 4", 5", 6")
(8", 10", 12", 14",
16", 18", 20")
(24", 28", 30", 32", 36",
40", 42", 44", 48")
Pulse width Europe
ms m
3
50 0.01
50 0.1
50 1
50 10
Operating Instructions, 11/2018, A5E03071515-AE
USA Australia
Gallons ML
1 0.001
10 0.001
100 0.01
100 0.01
SITRANS MAG 8000