Unit Selection; A.5 Unit Selection - Siemens SITRANS F MAG 8000 Standard Operating Instructions Manual

Flow Tool

A.5 Unit selection

Figure A-4
There is no limitation on the number of customer-specified parameter lists.
Saving the project will make the parameter list configuration available for future use.
Note
Saving the file with only the customized parameter list expanded will make future monitoring
and changes of parameters easier.
See also
www.siemens.com/flow (www.siemens.com/flow)
A.5

Unit selection

MAG 8000 and MAG 8000 CT are delivered with totalizer and flow rate units as ordered via
the MLFB structure.
The standard MAG 8000 units for each region are:
● Europe: m
● US: Gallon for totalizer and GPM (Gallon per minute) for flow rate
● Australia: ML for totalizer and ML/d (Mega liter/day) for flow rate
122
Customer-specified parameter list
for totalizer and m /h for flow rate
3 3
Operating Instructions, 11/2018, A5E03071515-AE
SITRANS MAG 8000