Document History; Product Compatibility - Siemens SIPART PS100 Operating Instructions Manual

Introduction
2.4 Product compatibility
2.3

Document history

The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
06/2023
05/2021
03/2020
2.4

Product compatibility

The following table describes the compatibility between the edition of the manual, device
revision, engineering system and associated Electronic Device Description (EDD).
Manual
edition
06/2023
05/2021
03/2020
10
Comment
• Section "Technical specifications" revised
• Section "Bluetooth" revised
• Information on UKCA has been inserted
• Changes for FW 1.03.00, HART device revision 1
• HART communication in various sections
• Explosion protection in various sections
• "Troubleshooting" section: New Info-ID 6Y (Page 50)
• "Technical specifications" section New "Explosion protection"
• "Service and maintenance" section New "Replacing electronics (Page 55)" and
"Replacing a pneumatic block (Page 58)"
• New section "Bluetooth (Page 71)"
• Changes for FW 1.02.00, HART device revision 1
• Changed parameter IDs
• In "QUICK START" menu: New parameter "VALVE TYPE" [06]
• In "SETUP" menu:
– For "BEHAVIOR DO" [01] new function "POS"
– For "BEHAVIOR DO" [01] function "NONE" changed to "ERR M"
– New parameter "DO POS LIMIT" [03]
• In "MAINT/DIAG" menu:
– The parameters "PIEZO 1" [56] and "PIEZO 2" [57] were renamed to "PILOT 1"
[04] and "PILOT 2" [05].
– New parameter "HW Version" [06]
• "Troubleshooting" section: Addition info IDs are displayed for the status of the
digital input (DI) in the "AUTO" operating mode: 6E, 6F, 6H
Comments Device revision
Manual revised FW: 1.03.00 or higher
Device revision 1 or higher
New device features
New device features FW: 1.02.00 or higher
Device revision 1 or higher
Compatible version of de‐
vice integration package
EDD: 1.00.00
-
Operating Instructions, 06/2023, A5E50188938-AF
SIPART PS100