Preparing The Unit For Exposure - Sirona Galileos Getting Started Manual

2 Creating 3D X-Rays
Procedure
6
2.1

Preparing the unit for exposure

1. Start SIDEXIS.
2. Select the appropriate patient.
i
NOTE
If the last scan has not yet been confirmed, you must confirm it before
proceeding: Press the R key. Press the R key again to move the unit to
the start position.
3. Click the 3D Exposure Readiness button.
If only one X-ray unit is enabled for the workstation, it will be selected
automatically. If more than one unit is available, the Select X-ray
component dialog appears.
61 81 155 D 3437
D 3437.202.01.02.02 05.2007