Installing The Software; Sources For Installation Of The Operating System - Siemens Simatic IPC547E Operating Instructions Manual

Device maintenance and repair

7.5 Installing the software

7.5 Installing the software
7.5.1

Sources for installation of the operating system

If the operating system is faulty, you can reinstall it with one of these DVDs:
● With the recovery DVD and "Documentation and Drivers" DVD
The recovery DVD is included in the scope of delivery when you have ordered a device
with operating system. The recovery DVD includes:
– The installation program for installing the operating system with the supported
– The tools for setting up the drives
The basic language of the installed operating system is English. If additional languages
are required, install these from the recovery DVD.
The "Documentation and Drivers" DVD contains the documentation and the hardware
drivers.
● From the Restore DVD
The Restore DVD is included in the scope of delivery when you have ordered a device
with operating system. The DVD contains an image file with the following software:
– Operating system with installed hardware drivers
– Monitoring software, e.g., DiagBase.
98
NOTICE
Damage to the processor
If the installed processor is operated with a higher clock frequency than permitted, it can
be destroyed or cause loss of data.
Operate the processor only at a clock frequency that is equal to or less than the
permitted clock frequency.
languages
Operating Instructions, 02/2014, A5E32317120-AB
SIMATIC IPC547E