Advanced Settings - Siemens Simatic IPC547E Operating Instructions Manual

Hide thumbs Also See for Simatic IPC547E:
Table of Contents

Advertisement

8. Change the default password.
9. Enable "Intel (R) AMT Configuration > Manageability Feature Selection".
10.Enable "Intel (R) ME General Settings > Activate Network Access".
8.7.4

Advanced settings

The BIOS and the MEBx contain the most important basic settings for AMT. Additional tools
are necessary if you want to make more advanced settings. If required, these must be
downloaded from the relevant manufacturer's site. For information on the options and use of
these tools, refer to the relevant documentation of the manufacturer.
● Manageability Commander and other tools of the Intel DTK (Manageability Developer
● AMT Web interface: For encrypted connections, the URL of the Web interface is "https://
● WinRM: A command line program that is part of Windows as of Windows Vista. This tool
SIMATIC IPC547E
Operating Instructions, 02/2014, A5E32317120-AB
The new password must include the following characters:
– In total at least eight characters
– One upper case letter
– One lower case letter
– One number
– One of the special characters ! @ # $ % ^ & * @ # $ % ^ & *
Note
The underscore and and blank space are valid password characters but do not
increase password complexity.
Tool Kit): Programs from the Intel DTK that you can download from the Internet at
"http://software.intel.com/en-us/manageability".
<Fully qualified domain name>:16993" and for unencrypted connections "http://<IP
address>:16992".
can be downloaded for older Windows versions.
8.7 Description of Active Management Technology
Technical specifications
131

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents