Installing The Drivers And Software - Siemens SIMATIC IPC227G Operating Instructions Manual

Maintaining and repairing the device
6.4 Reinstalling the operating system
6.4.1

Installing the drivers and software

Requirements
• Windows 10 operating system is installed in your IPC.
• You need to connect a mouse, a monitor and a keyboard to your PC.
• You also need the supplied USB stick to your PC.
Drivers and software list
The following drivers and software need to be installed on Windows 10:
Operating system
Windows 10
Procedure
1. Connect the supplied USB stick to the USB port.
2. Start the program "START_DocuAndDrivers".
3. Select "Drivers" in the index.
4. Select the device and operating system.
5. Select the required driver.
6. Follow the below steps and click the icon
Note
For a new installation of Windows operating systems, the chipset driver must be installed
before all other drivers, if required.
Step 1: install the chipset driver
1. Click Step1: Intel® Chipset Device Software.
2. Click
3. Click Next to continue.
4. Click Accept to accept the license agreement.
56
Drivers and software needed
• Step1: Intel® Chipset Device Software
• Step2: Intel® Converged Security Engine
• Step3: Intel® HECI Controller Driver
• Step4: Intel® Gigabit Ethernet Driver
• Step5: Intel® UHD Graphics Driver
• Step6: Intel® Serial I/O Driver
• Step7: Intel® Graphics Command Center
to install the chipset driver.
to install the required driver.
Operating Instructions, 07/2022, A5E50059933-AC
SIMATIC IPC227G