Table of Contents
Advertisement
Device maintenance and repair
7.5 Installing operating system, software and drivers
Procedure
1. Remove the battery from socket as
shown.
2. Place the new battery below the two con-
tacts (1) and press it into the base (2)
while applying slight pressure.
3. Close the device.
4. Check the firmware/BIOS settings.
7.5
Installing operating system, software and drivers
You can restore the factory settings of the target system (i.e. the volume partitions, the
operating system with installed device drivers, and the SIEMENS software products). This
allows you to restore your device quickly if it has suffered damage.
Provision of operating system, software and drivers
Possible sources of the Restore or Documentation and Drivers set:
• USB flash drive supplied (optional, if ordered)
• Online Software Delivery Portal: You can download the Restore or Documentation and
Drivers Set for the device from the Online Software Delivery Portal. To do this, log in to
Online Software Delivery Portal
(https://www.automation.siemens.com/swdl/Login?lang=en), download the required data
set and use it to create a bootable USB flash drive.
For more information, see the Product Information for creating a bootable USB flash drive,
see"Important instructions and manuals for operating the device (Page 10)".
Installing the operating system
Additional information on restoring or reinstalling the operating system you ordered with the
device can be found in the detailed description of the operating system, see "Important
instructions and manuals for operating the device (Page 10)".
Installing software and drivers
1. Insert the bootable USB flash drive into the device.
2. Start the "Documentation and Drivers" suite from the USB flash drive by executing the
"START_DoucAndDrivers.CMD" file.
3. Install the desired software and drivers.
80
Operating Instructions, 08/2022, A5E51699601-AA
SIMATIC IPC PX-39A
Advertisement
Table of Contents
