Siemens Simatic IPC547E Operating Instructions Manual page 72

Device maintenance and repair
7.1 Managing RAID systems
Manual integration of the hard disk (in the event of an error)
1. Select "Start" > "Programs" > "Intel Rapid Storage Technology".
2. Click
Or:
1. Reboot the device.
The RAID software automatically integrates the hard disk.
2. Click on the link "Rebuild to another Disk".
Synchronization of the RAID system is initiated after clicking the link "Rebuild to another
disk".
72
"Run Hardware Scan now".
The new hard disk is found and displayed.
Click on the link "Rebuild to another Disk".
Operating Instructions, 02/2014, A5E32317120-AB
SIMATIC IPC547E