Datex-Ohmeda F-LM1 Technical Reference Manual page 345

1 INTRODUCTION
This guide describes how to install the DataCard & Network upgrade set for Light Monitors, F-LM1
and F-LMP1. The DataCard & Network upgrade set provides a patient trend data collection to
Datex-Ohmeda PCMCIA MemCard and Network connection to Datex-Ohmeda Information Centre.
With the DataCard, the patient trend data collected with the Light Monitor can be transferred to
other S/5 monitors. The Network permits central monitoring functions and printing services.
1.1 Installation time
Approximately 30 minutes to one hour.
1.2 Tools needed
Cross head screwdriver.
1.3 Parts needed
617120
617210
892523
892524
892996
894698
617210
887045
893310
894697
Cross cylinder screw
Cross cylinder screw
Ethernet cable
ID cable
Connector board
Ethernet board
Cross cvl. Head screw M3x6 tufflock
Data MemCard
Cover plate
PC board
Optional N-LDNET Upgrade for Light Monitors, F-LM1 and F-LMP1
2 pcs
3 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1
Document No. 896552-2