Service Procedures; General Service Information; Service Check; Visual Inspection - Datex-Ohmeda F-LM1 Technical Reference Manual

2

SERVICE PROCEDURES

2.1 General service information

Field service for the CO
parts. The board should be returned to GE Healthcare for repair.
GE Healthcare is always available for service advice. Please provide the monitor serial number, full
type designation, and a detailed fault description.
CAUTION Only trained personnel with the appropriate tools and equipment should perform
the tests and repairs outlined in this section. Unauthorized service may void
warranty of the unit.

2.2 Service check

Perform these checks after any service and at least once every six months to keep the monitor in
good condition.

2.2.1 Visual inspection

1.
board is limited to the replacement of faulty circuit boards or mechanical
2
Make sure that the Mainstream Sensor connector is intact.
Service procedures
7
Document No. 8000060-1