Sony Multiscan CPD-1304S Service Manual page 64

7
The Audit trail is a Protocol archive. It is located in the Basic System and thus
existing in all Elster device types. In the left drop-down list, it is possible to select
between general and fiscal audit trail. General audit trail and fiscal Audit trail
differ in the type of archived data.
Figure 7.26: Display General audit trail Overview
Figure 7.27: Display fiscal audit trail Overview
By activating the hyperlink behind the
entry, the corresponding display can be
viewed to see audit trail entry in detail.
See the example on the right hand side.
Details of the change are e.g. Date and
time, old value / new value, logged-in user
or part that has executed the change.
The contents will be displayed in the
current device language.
scope of the displayed data depends on the
situation and the settings in enSuite. See also
chapter 8 and enSuite online help.
More information about logboogs  See chapter 7.3.7
Page 64 of 135
In general audit trail, the change log events
recorded can be displayed more clearly with a
filter in the right drop-down list. There is a choice
between:
"All" (Filter not used)
"System"
"Parameter change"
"User log"
In the fiscal audit trail, parameters that can be
changed even if the security switch (SSW) is
closed are recorded if the device is used for
billing purposes. The actions will only be recorded
in such cases (closed SSW); in other cases the
archive is empty. This part of archive is primarily
relevant for billing purposes.
The nature and
G a s Q u a l i t y A n a l y z e r
GasLab Q2 displays and operating the device
Figure 7.28: Example audit trail details
GasLab Q2