User Management And Login - Sony Multiscan CPD-1304S Service Manual

8
Q2 AFB
Includes the default parameters, which are explained in the online help. Here
you can get the information about: Calculation standards; Correction input;
Base calibration; Service calisbration; Operational calibration; Verification and
Limits. Flushing times and the composition of the calibration gases are there
also stored and set.
The AFBs Postprocessing, Archive and Modbus are used for calculations archives and data
communications. The final parameterization is is not determined at delivery. These AFBs could
subsequently be configured and designed for the necessary functions. The online help contains
the necessary information.
Displays
The folder contains all displays (see "Home" chapter 7). All factory displays
are protected. You realize that at the "padlocks". You only have the option to
customize the displays and create new displays. See the information later in
this operating instructions.

8.2 User management and Login

Six different user profiles with different permissions are available in user management. The
operator is provided with up to 3 profiles (profiles 3-5) as customer profiles. The other profiles
profiles are used for service, production and development purposes; they are not accessible
during normal operation.The authorization concept is roll-based. The rights are assigned to each
profile. Each profile contains a non-erasable super-user "SUX" and offers the possibility to create
up to 9 additional users. The user thus has access to the relevant part of the parameters. As
mentioned in chapter 7.3.6, the super user "SU3" of the 3rd profile is pre-set at the factory.
In principle, a parameter can only be altered and used in the device, if the user
has the authorization and the position of the SSW switch permits it.
In the case of rare work, without existing authorization, you can get a so-called
"Daily" (password for a day) from Elster GmbH to carry out this work by
arrangement. Changes in the user management are not possible with the given
passwords. If you want to change this presetting or use the hardware security
switch (SSW), please contact Elster GmbH.
The login dialog appears automatically at the appropriate point in the action.
To login, you need the
user name and the
password.
Please ask the station operator or the
super user.
In the delivery state, the default login as user SU3 without a password is
preset. Further information about the user management, see the description of
the Basic System in online help.
Page 100 of 135
Operation and parameter setting on the PC with enSuite
G a s Q u a l i t y A n a l y z e r GasLab Q2