Sony Multiscan CPD-1304S Service Manual page 62

7
The last optional display, NTP overview, is only displayed if the NTP synchronization in Q2
device is enabled. Information on activation and function
after activation of NTP overview in the Time Service Main display.
Figure 7.23: Display Time Service NTP overview (option)
The display presents the action: Update now to synchronize System time with NTP server. In
addition, the following entries are still displayed:
Last update
Time stamp of the last time synchronization via NTP. If synchronization
has already been carried out
synchronization can be seen (date, time
Last deviation Deviation (
specifies how many seconds the device's internal clock deviated from
the standard time in the last synchronization
Server used Name or IP address of the NTP server used for the last time
synchronization
Server stratum
Stratum values of the NTP server
(number of computers up to the time reference in the NTP hierarchy).
The user management only presents the "Users Main display"on the device or
on the remote operation panel. Login and logout is done via this display, which
changes its appearance accordingly. After successfully logging on locally, local
actions to apply or discard the modified parameters and logout are displayed.
The bottom line of all displays contains a user icon during a user is logged in.
See the following figures.
Page 62 of 135
seconds) for the last time synchronization via NTP
in
Figure 7.24: Users Main display with out / with login
G a s Q u a l i t y A n a l y z e r
GasLab Q2 displays and operating the device

See chapters 8 and 11.2. It opens
in the display the exact time
,
time zone).
,
the last time synchroni-zation.
used for
this
of
GasLab Q2