Sony Multiscan CPD-1304S Service Manual page 61

GasLab Q2 displays and operating the device
For the non-logged-in or logged-in users, without the right to change the device time, the display
"Time Service Time Synchronization" opens as second display after "Date & Time" has been
activated.
Time synchronization by:
Next possible synchronization:
Expected new time:
Synchronize now:
For the logged on user, with right to change the device time, the display "Date & Time" opens as
a second display after activation "Date & Time".
The type of representation or the order of the display (parameterizable  See chapter 8) depents
on language and time stamp format. See the following examples
Figure 7.22: Display Time Service Date & Time with different time stamp formats
The "Date & Time display enables action to set the system time and to make the selection for
the application of (DST) daylight saving time
More information about these displays and the functions  See chapter 7.3.9.
GasLab Q2
Figure 7.21: Time Service Time Synchronization
insert the seconds in the field at which the system time
should be changed.
displays the next possible time for further synchro-
nization. Calculation takes place after a synchro-
nization based on the parameter "Synchronization
Interval"
in this line, the time service continuously calculates the
new system time
with this action (if selectable), the expected new time
will be used as system time.
G a s Q u a l i t y A n a l y z e r
:
Page 61 of 135
7