View Event-Related Display Texts In The Error List; List Of Event-Related Display Texts - Sony Multiscan CPD-1304S Service Manual

GasLab Q2 displays and operating the device

7.4.2 View event-related display texts in the error list

Background
If the status LED is red or yellow flashing or steady lights in these colors, records are in the error
list. In this list, the device displays the event-related display-texts such as warning and alarm
messages or system messages, such as reboot or power interruption. The Error list is sorted
chronologically; the most recent message is displayed first. You can filter this total list.
Procedure

You reach the Error List Main Display via the icon
the current event-related display texts. Now you have twol options:
► If there are only a few errors in the total list, scroll down to specific messages.

► To selectively filter messages from different parts of the software, select a filter from the
drop-down list e.g. "Time Service". It only displays the associated messages.

7.4.3 List of event-related display texts

The following section provides a selection of event-related display texts of the device.
Depending on the software version, the message text may differ from the
examples shown here, although the meaning of the message is not changed.
These are alarms, warnings or messages or hints. All events are binary. They are available at a
certain time or not.
The texts are produced by different software parts (called AFB and SFB). Depending on the
content, the messages are deleted after eliminating the phenomenon cause or stored in the
logbook or audit trail under the appropriate categories.
Depending on the parameterization of the device, some of the following warning and alarm
messages occur.
In many cases, the message reason is mentioned in the message text its selve e.g. Lost archive
entries. For a list of all event-related display texts of the device, view the export window of
enSuite.  See chapter 8 and online help.
You can usually prevent or eliminate messages (warnings and alarms) of the
time service SFB by changing the parameter settings ( See chapter 8). If the
parameterization does not have any errors, please contact Elster GmbH.
GasLab Q2 G a s Q u a l i t y A n a l y z e r
Error List. The Error List shows all
Page 87 of 135
7