Troubleshooting; Troubleshooting-Barcode Scanning - Infinite Peripherals Linea Pro 7 Plus User Manual

TROUBLESHOOTING

Troubleshooting—Barcode Scanning
If the Linea Pro 7 Plus is not scanning barcodes properly, refer to the table
below for possible causes:
Problem
Scanner does not power
on
No barcode data
being returned during
scanning
Partial barcode data
returned during
scanning
Unable to perform
multi-scanning
Unable to hear scanner
beep
Unable to scan certain
barcode symbols
• Linea Pro 7 Plus battery is too low
• Linea Pro 7 Plus is not powered on by the software
• Faulty scan engine
• Unreadable barcode
• Linea Pro 7 Plus battery is too low
• Faulty scan engine
• Software decoding incorrectly
• Unreadable barcode
• Linea Pro 7 Plus battery is too low
• Faulty scan engine
• Software decoding incorrectly
• Multi-scan mode not enabled
• Software does not support multi-scan
• Sound mode not enabled
• Linea Pro 7 Plus battery is too low
• Barcode type is not enabled
• Barcode type is not supported
See the Technical Data section for additional information.
•
Possible Cause
Page 20