Using Your Linea Pro 7 Plus; Barcode Scanner-1D Or 2D Barcodes - Infinite Peripherals Linea Pro 7 Plus User Manual

USING YOUR LINEA PRO 7 PLUS

Barcode Scanner—1D or 2D Barcodes
The scan engine in the Linea Pro 7 Plus 1D model supports one-dimensional (1D)
barcode symbols. The 2D model scan engine supports one-dimensional (1D) and
two-dimensional (2D) barcode symbols. The effective reading distance of the
barcode reader varies based on the barcode size. For example, 15-20 cm (5.9-7.9
inches).
These types of scanning modes are supported:
• Single scan
• Multi-scan
• Motion detect
• Multi-scan without duplicates
To scan a 1D or 2D barcode:
1. Press and hold the Scan button on either side of the unit to activate
the Linea Pro 7 Plus.
2. Position the scan head as close to the barcode label as possible so
the scan line crosses both ends of the barcode.
3. Slowly pull the unit back, increasing the distance between the
barcode and scan head, until the barcode is read by the scanner.
Data is displayed on the iOS.
Figur
Page 17