Capenergy C 50 User Manual page 83

The equipments of the CAPENERGY product range: C400, C300, C200, C100, C50 and
C500, require special precautions regarding CEM and need to be installed an used
according to the CEM information provided in this user manual.
Guidance and manufacturer's declaration – electromagnetic emissions
The equipments of the CAPENERGY product range: C400, C300, C200, C100, C50 and C500 are
intended for use in the electromagnetic environment specified below. The customer or the user the
CAPENERGY product range: C400, C300, C200, C100, C50 and C500 should assure that it is used
in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emission
IEC 61000-3-2
Voltage fluctuations/ flickers
emissions
IEC 61000-3-3
Table J-1. Electromagnetic emissions
REGARDING ELECTROMAGNETIC
Compliance Electromagnetic environment - guidance
GROUP 2 The equipments of the CAPENERGY product
range : C400, C300, C200, C100, C50 and
C500 must emit electromagnetic energy in order
to
electronic equipment may be affected..
Class A The equipments of the CAPENERGY product
range : C400, C300, C200, C100, C50 and
C500 is suitable for use in all establishments
Class A
other than domestic, and may be used in
domestic establishments and those directly
Complies
connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes, provided the following
warning is heeded:
Warning: This equipment/system is intended
for use by healthcare professionals only. This
equipment/
interference or may disrupt the operation of
nearby equipment. It such as re-orienting or
relocating
CAPENERGY product range : C400, C300,
C200, C100, C50 and C500 or shielding the
location.
User Manual
Page 83 of 95
COMPATIBILITY (CEM)
perform its intended
system may
the equipments
Appendix F
function. Nearby
cause radio
of the