Capenergy C 50 User Manual page 27

STATUS
STANDBY
WORKING
TIME
COMPLETED
ACTIVE
SAFETY
CONTROL
ICON
The otuputs are deactivated.
STBY GRAPHIC
Allows:
Procedure:
The outputs are active.
WAVE GRAPHIC
Allows:
Procedure:
Treatment time has been completed.
STOP GRAPHIC
Procedure:
Safety control has been activated
SAFETY CONTROL GRAPHIC
Procedure:
Tabel 4.1. Statuses in BASIC MODE
User Manual
Page 27 of 95
DESCRIPTION
Modification of the chosen total treatment
time.
Modification of the power or temperature
configuration of the disabled channels.
Press the button WORKING / STANDBY
to change to WORKING status.
Press the OK button to return to the main
menu.
Power supply modification
Press the WORKING/STANDBY button to
change to STANDBY status.
Warning finalized treatment time.
The outputs have been deactivated.
Press OK to go back to STANDBY
Outputs have been deactivated.
Press the OK button
STANDBY.
to return to