Capenergy C 50 User Manual page 57

Coupling creams
The coupling product serves to facilitate the electrical coupling and lubricate the
treated area to facilitate the displacement of the capacitive and resistive active
electrodes.
The recommended conductor product by the manufacturer to lubricate and facilitate
the movement of the electrodes is a emulsifier cream with moisturizing and emollient
properties, preferably free of parabens, with a proportional composition containing
natural oils, antioxidants extracts, and polar fatty factor.
You can neither use as a conductor product any cream whose composition
percentage is higher in water than oil, nor gels. You cannot either use any cosmetic
product which has been previously validated by the manufacturer
We do not recommend the use of products that contain cryogenic substances such
as menthol, camphor or similar. The same goes for carbon-based conductor gels: the
product base should by fat-soluble.. .
Do not use corrosive products such as glycolic acid.
You cannot use abrasive, thermogenic, cryogenic or anesthetic substances
You cannot use any substance which is identified to be aggressive for accesories,
due to the risk of electrode breakage.
7.3 POSSIBLE TREATMENT MODES
The multi-purpose design of the different CAPENERGY devices allows using different
combinations of manual electrodes and / or capacitive plates during one single
treatment.
In order to do so, you have to select the treatment you wish to perform:
I. Do you wish to work with one (1) automatic electrode (plate)
II. Do you wish to work with two (2) automatic electrodes (plates)
III. Do you wish to work with three (3) automatic electrodes (plates)
IV. Do you wish to work with four (4) automatic electrodes (plates)
V. Do you wish to work with one (1) insulated manual electrode (capacitive electrode
holder)
VI. Do you wish to work with one (1) automatic electrode (plate) and one (1) insulated
manual electrode (capacitive electrode holder)
User Manual
Page 57 of 95