Capenergy C 50 User Manual page 62

6. Once the treatment has come to an end, the passive plates will be removed (this
should only be done after the device has been turned off and without brusquely
pulling from the cables as this could damage the plates).
7. You can now proceed to cleaning the plates and/or manual electrodes used during
the treatment.
8. When accessories are changed in the course of a treatment, the device will turn down
automatically as a safety measure. Accessories should be changed with the device
on hold.
Press the start/stop button to
change accessories in the course
of a treatment
User Manual
Page 62 of 95
Screen indicating the device is on
hold.