Capenergy C 50 User Manual page 67

7.5 WORKING PROTOCOL FOR THE CAPENERGY DEVICES
Application with capacitive manual electrodes
The experience gathered by various operators (doctors and therapists) working
thousands of patients all over the world, has allowed us to develop easy, secure and
efficient treatment protocols that deliver fast results.
APPLIED PARAMETERS
Position of the
electrode
Movement of the
electrode
Temperature:
Application time
Position of the
passive electrode
SUMMARY
The ideal way to use CAPENERGY devices is combining manual/automatic modes. It is
particularly recommended to start the session by treating the trigger points during a
couple of minutes in manual capacitive mode and then continuing with the automatic
plates.
On those points indicated for the pathology that is being
treated
Fixed and slightly rotating, covering an area slightly larger
than the diameter of the electrode.
No matter what problem is being treated, the temperature
generated has to be bearable. The patient has to perceive
a pleasant sensation of lukewarmness.
The electrode should remain on each of the treatment
points for 5 to 10 minutes, depending on the amount of
points considered and the total duration of the session.
There are no counter-indications so the operator may
prolong the treatment time of the considered areas as long
as he sees fit.
It is best to always position the passive plate close to the
treated problem area.
User Manual
Page 67 of 95
on