Capenergy C 50 User Manual page 32

STATUS
STANDBY
WORKING
COMPLETED
TIME
ACTIVE
SAFETY
CONTROL
UNALLOWED
CHANGE OF
ACCESSORY
NO
ACCESSORIES
ICON
The outputs are deactivated.
STBY GRAPHIC
Allows:
Procedure:
The output are activated.
READY graphic
Allows :
Procedure :
Treatment time has been completed
STOP Graphic
Procedure:
Safety control has been activated.
SAFETY CONTROL graphic
Procedure :
Some accessories are wrongly connected
WARNING graphic
Procedure :
No valid combination of accessories connected to
the device
EMPTY SQUARE graphic
Procedure:
Table 4.2. FREE TREATMENT statuses
User Manual
Page 32 of 95
DESCRIPTION
Modification of the chosen total treatment
time.
Modification of the power or temperature
configuration of the disabled channels.
Press the button WORKING / STANDBY to
change to WORKING status.
Press the OK button to return to the main
menu.
Modification of the disabled total treatment
time.
Modification of the
temperature.
Press WORKING/STANDBY button to change
to STANDBY.
Warning finalized treatment time
The outputs have been deactivated
Press OK to go back to STANDBY
The outputs have been deactivated
Press the OK button to return to the
STANDBY status.
While the device is WORKING, an accessory
has been connected or disconnected.
Press the OK button to go to STANDBY.
When connecting a valid combination of
accessories, the device will go in STANDBY
mode.
enabled power or