Capenergy C 50 User Manual page 15

Diathermy equipment
Table of Contents

Advertisement

Manipulation and Maintenance
Before connecting the device to the power supply network, make sure you have
the correct voltage: tension overloads may damage the device.
Before cleaning or performing maintenance on the device, make sure the device
has been disconnected from the power supply.
Manipulating the device in any way will automatically invalidate the warranty.
WARNING: No modification of equipment is allowed
Accessories
The accessories should be used exclusively with the device.
If an accessory or consumable item presents flaws, it should be taken out of
circulation immediately.
Periodically check the cables of the accessories to make sure they are in a perfect
state.
Do not use extension wires for the mains cord.
The resistive and capacitive electrodes must not be replaced from the electrode
holder when the outputs are actives. The electrodes have to be replaced when the
equipment is en the STANDBY status or turn-off..
External agents
The device should never be used in the presence of inflammable gases or liquids.
The device should not be exposed to atmospheric agents.
Technical assistance
Technical assistance can be performed by the manufacturer or authorized
distributor only.
The manufacturer and distributor can be held reliable for the product's safety only
if all repairs, modifications and adjustments have been made by specifically
authorized personnel and the device has been used by qualified personnel only
and according to the safety instructions.
Only personnel authorized by the manufacturer can service the device, especially
when the interior of the protective covers is concerned. This includes all kinds of
adjustments of the power supply, power and control phases, etc. Dangerous
voltages are present on the inside of the device.
Before performing maintenance on the device, it should be disconnected from the
power supply. Servicing the device when it's on, may be dangerous for the user
and / or damage the device.
User Manual
Page 15 of 95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C 100C 200C 300C 400C 500

Table of Contents