Capenergy C 50 User Manual page 43

Problem
The device does not
recognize an accessory
or does not identify it
correctly.
The temperature level
of the active accessory
connected to a channel
is not correct.
Probable cause
The passive plate or
active accessory, are
not connected correctly.
Defect accessory.
Electronical breakdown.
The active accessory is
not connected correctly.
Defect accessory.
Electronical breakdown.
User Manual
Page 43 of 95
Action
Make sure the passive plate
or active accessory are
connected correctly to their
corresponding connectors.
Try to connect
accessory to another
channel. If the problem
persists, replace the defect
accessory for a
working one.
Try to connect
accessory that is identified
correctly when connected to
another channel. If it is not
identified correctly, contact
the technical service
department.
Make sure the
accessory is connected
correctly to its connector.
Try the accessory
another channel,
problem persists, replace
the defect accessory for a
new one.
Connect an
accessory that
correctly in another channel
to the channel you are
having problems with. If the
problem persists, contact
the technical service
department.
the
good
an
active
in
if the
active
works