Table of Contents
Advertisement
60
C
3
HAPTER
Maintenance
Figure 92. Side rail and deflector
11.
Figure 93. Side rails removal
12.
Deflector
Stand
Side Rail
stand
Unbolt the side rails from the
right- and left-hand side hopper
walls (Figure 92. "Side rail and
deflector stand" & Figure 93.
"Side rails removal");
Side Rail
When both side rails are
removed, start the engine and
engage the hydraulic pump;
13.
Extend the packer about
12 inches before the end of the
stroke;
14.
Turn the engine and hydraulic
pump off;
DANGER
N
EVER CLIMB IN THE HOPPER WHILE
THE ENGINE IS RUNNING
15.
Replace both wear pads and bolt
them back in place;
16.
Start the engine and engage the
hydraulic pump;
17.
Retract the packer;
18.
Reinstall the side rails, plastic
shields and deflector stands
back in place.
19.
Turn the engine and hydraulic
pump off;
DANGER
N
EVER CLIMB IN THE HOPPER WHILE
THE ENGINE IS RUNNING
.
.
Hide quick links:
Advertisement
Table of Contents
