Probe Tip
Protective Cap
Figure 188. Sample bottle probe tip
12.
Install the probe on the coupler
to fill the sample bottle;
CAUTION
D
O NOT OPEN THE BOTTLE CAP
Figure 189. Sample bottle probe
13.
Fill the bottle to the level mark
(Figure 190. "Sample bottle");
Recommended Oil Level
14.
15.
.
Probe
Figure 191. Probe removal from the
Expert(t) 2000
Maintenance Manual
Figure 190. Sample bottle
Remove any excess of oil
through the vent;
Once the sample is taken,
remove the probe from the
coupler and pull out the probe to
remove it from the bottle (Figure
191. "Probe removal from the
bottle");
bottle
TM
127