Table of Contents
Advertisement
102
C
3
HAPTER
Maintenance
10.
Note:The engine must be running at
Main Relief Valve
Adjustment
Figure 162. Main valve
Turn on the speed-up system on
the packer control station (Figure
163. "Right-hand side control
station")
1200 RPM before checking the
pressure (refer to "Pressure
Adjustment Table" on
page 106);
Figure 163. Right-hand side control
station
11.
Activate the crusher panel until
the cylinder reaches the end of
its stroke (Going up);
12.
Adjust the dump valve 3300 PSI
or 2300 PSI (refer to pressure
adjustment table);
13.
Lock the dump valve screw in
place, then the main relief;
14.
Readjust the main relief
according to pressure table in
section 1.15.2;
Speed-Up
(Bunny
Button)
Hide quick links:
Advertisement
Table of Contents
