Table of Contents
Advertisement
Problem
The packer does
not start at all
when you press
the green button.
Problem
The yellow
R
ETRACT
button functions as
a press-and-hold
button instead of a
just-press button.
Possible cause(s)
The PTO switch is off.
There is a red emergency
button pressed-in.
S
TOP
The packer controls station
of the pressed button has
not been selected.
Possible cause(s)
There is a hydraulic
defficiency.
There is a defective
electrical harness.
The packer module is
deffective.
Expert(t) 2000
Maintenance Manual
Solution(s)
Turn on the PTO switch.
Verify that all red
emergency
buttons
S
TOP
are pulled out.
Verify the packer controls
station selector switch; it
must be turned to the
corresponding station.
Solution(s)
Verify and make sure the
hydraulic pressure is at the
proper level.
Apply the electrical system
troubleshooting between
the packer module and the
corresponding packer
control station.
Troubleshoot the packer
module. Call the Labrie
Customer Support Center
for details.
141
TM
Hide quick links:
Advertisement
Table of Contents
