Table of Contents
Advertisement
140
C
5
HAPTER
Troubleshooting
The packer moves
irregularly or
sideways
The tailgate
unlocks and lowers
by itself
The packer doesn't
complete a full
cycle
Problem
Possible cause(s)
The packer wear plates are
worn out.
Problem
Possible cause(s)
The velocity fuse is dirty or
deffective
Inverted hydraulic hoses
on the main hydraulic
valve.
Problem
Possible cause(s)
The body is full, preventing
the packer to reach the
fully extended position.
An accumulation of refuse
material behind the packer
doesn't allow the packer to
reach its fully retracted
position.
The limit switches for the
packer lost their settings or
are annoyed by some
debris.
Solution(s)
Replace the wear plates.
Solution(s)
Clean or replace the
velocity fuse. Call the
Labrie Customer Support
Center for details.
Test the power bleed on
the tailgate section of the
valve. Call the Labrie
Customer Support Center
for details.
Solution(s)
Unload the body.
Clean the area behind the
packer.
Clean the area around the
limit switches and/or adjust
their settings.
Hide quick links:
Advertisement
Table of Contents
