Checking The Delivery Package - Siemens SIMATIC IPC BX-32A Operating Instructions Manual

Installing and connecting the device
3.1 Preparing for installation
3.1.2

Checking the delivery package

Electric shock and fire hazard due to damaged device
Damaged devices due to improper storage or transport may lead to personal injury and/or
substantial damage to equipment.
• You must observe the warnings in "Note on transport and storage (Page 20)".
Procedure
1. Check the delivery unit for any signs of visible transport damage.
If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
2. Unpack the device at its installation location.
3. Keep the original packaging in case you have to transport the unit again.
4. Check the Scope of delivery (Page 25) and any accessories you may have ordered for
completeness and damage.
If the contents of the package are incomplete, damaged or do not correspond to your
order, you can use the After Sales Information System (ASIS) (http://siemens.com/asis) to
provide feedback on product deliveries and repairs.
Complete the online form for product delivery (quality control notification) under the
heading "Product delivery: Feedback on quality control and repairs".
5. Please keep the documentation in a safe place. It is required for initial commissioning and is
part of the device.
6. Note down the Identification data of the device (Page 27).
26
WARNING
Operating Instructions, 09/2023, A5E52798407-AB
SIMATIC IPC BX-32A