Figure 95. 3.5 inch x18 internal PERC
1
SAS cable (BP: SAS_A0 to internal PERC card: SAS_A)
3
internal PERC card
Integrated storage controller card
Removing the integrated storage controller card
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the air
shroud.
4
Remove the GPU card
Steps
1
Holding the integrated storage controller card firmly, lift the card out of the server.
2
Disconnect the data cables from the integrated storage controller.
148
Installing and removing system components
Safety
instructions.
Before working inside your
holder.
2
SAS cable (BP: SAS_B0 to internal PERC card: SAS_B)
4
3.5 inch x18 SAS/SATA backplane
system.