Table of Contents
Advertisement
Figure 34. Installing a 3.5 inch drive adapter into the 3.5 inch drive carrier
Next steps
1
Install the drive
carrier.
2
If removed,
install the front
Removing a 2.5 inch drive from a 3.5 inch drive adapter
Prerequisites
1
Follow the safety guidelines listed in
2
Remove the 3.5 inch drive adapter from the 3.5 inch drive
NOTE:
A 2.5 inch drive is installed in a 3.5 inch drive adapter, which is then installed in the 3.5 inch drive carrier.
Steps
1
Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5 inch drive adapter.
2
Remove the 2.5 inch drive from the 3.5 inch drive adapter.
78
Installing and removing system components
bezel.
Safety
instructions.
carrier.
Advertisement
Table of Contents
