Trap Receiver; Configuring Users For Encrypted Snmp V3 Communications - HP HPE G2 Series User Manual

Trap Receiver

Setting up an SNMP trap receiver
Procedure
1. Navigate to Settings > SNMP Manager.
2. Select SNMP Port, and then set the trap port number.
3. Navigate to Settings > Trap Receiver.
4. Edit the SNMPV1 Trap Receiver by setting the name, host IP address, and community string.
5. Click Enable.
6. Click Save.

Configuring users for encrypted SNMP V3 communications

Procedure
1. Navigate to SNMP Managers > SNMP V3.
The SNMP V3 page is displayed.
2. Enter the server name and host IP address.
3. Choose a security level from the drop-down menu:
• NoAuthNoPriv—No authentication and no privacy, default option.
• AuthNoPriv—Authentication and no privacy.
• AuthPriv—Authentication and privacy.
4. Select an authentication method:
Simple Network Management Protocol (SNMP) 87