HP HPE G2 Series User Manual page 136

NOTE: If in daisy-chain configuration, the master will also upgrade the bootloader on all it's slaves.
sys upd conf
Description
Update system configuration.
Example output
HPE>sys upd conf
E801
system will enter upgrade mode after reboot
System Reboot now, Are you sure? (Y/N):Y
NOTE: There must be a valid file named conf.ini existing under directory/fw.
sys conf start
Description
Update system configuration through serial.
Example output
HPE>sys conf start
E801
system will enter into configure file upload mode after reboot
System Reboot now, Are you sure? (Y/N):Y
sys log del event
Description
Delete event log file.
Example output
HPE>sys log del event
E000
sys log del data
Description
Delete data log file.
Example output
HPE>sys log del data
E000
HPE>
136 Appendix