Configuring Environmental Sensors; Configuring Door Sensors - HP HPE G2 Series User Manual

The sensor type, name, PDU ID, PDU name, and PDU location is displayed for each sensor.
3. Confirm that the serial number on the sensor device matches the number in the sensor table.

Configuring environmental sensors

To configure the sensor name, location, alarms, notifications, and details, open the web interface.
Procedure
1. Open the Settings page.
2. View the Threshold section on the Settings page. To configure sensors, click Threshold.
3. To configure the desired sensors, click Edit.
4. In the Edit Extension dialog box, enter value of up critical, up warning, low warning, or low
critical.
5. To exit the sensor setup, click Save.
6. Repeat this process for additional sensors.

Configuring door sensors

The door sensor status on the Dashboard page displays as OPEN/CLOSE.
Procedure
1. Navigate to Thresholds > External Sensors.
2. Select the door that you want to receive an alarm, trap, or event notification for, and then enable the alarm.
• When the door is closed and the alarm is enabled for closed state, 165 - binary sensor 1 door
is in CLOSE state is the trap that is received.
• When the door is open and the alarm is enabled for open state, 165 - The binary sensor 1
door is in OPEN state is the trap that is received.
Connecting and configuring optional hardware 125