Appendix D: Horizontal Network Management Module Replacement - HP HPE G2 Series User Manual

Trap class
Trap critical
Clear traps
Appendix D: Horizontal Network Management Module
Replacement
Procedure
1. Loosen the left and right captive nuts on the Network Management Module by turning them
counterclockwise.
156 Appendix
Trap code Description
741 Data log cleared.
742 PDU configuration file imported.
743 PDU configuration file exported.
744 Firmware update completed.
745 Firmware update started.
746 An LDAP error occurred.
747 Network interface link state is up.
748 Communication module reset.
749 Communication module start.
750 Daisy-chain state changed.
751 USB Port?
752 User xxx logged in.
753 User xxx session timeout.
754 User xxx blocked.
755 User xxx password changed.
756 User password settings changed.
757 User xxx added.
758 User xxx deleted.
759 User xxx modified.
760 User admin logged out.
770 The PDU unit active power alarm is cleared.
773-775 The phase (1-3) voltage alarm is cleared.
776-778 The phase (1-3) current alarm is cleared.
791-838 The outlet (1-48) active power alarm is cleared.
839-844 The sensor (1-6) temperature alarm is cleared