Power Commands - HP HPE G2 Series User Manual

dev ver <slipaddr>
Description
Query sensor, power, or delay firmware version.
Example output
HPE>dev ver 1
HPE>dev ver 15
HPE>dev ver 35
NOTE: Relay: start from 1. Power: start from 15. Sensor: start from 35.

Power commands

pwr unit [idx]
Description
Query device information and query specified index unit electric information.
Example output
HPE>pwr unit
SKU: P9S20A,,,,,
Serial: ,,,,,
FuncType; PDU Metered
Rating: 220-24-V, 16A, 3.5-3.8kVA, 50/60Hz
Mac: C8:45:44:66:2B:26
Tcpip: 102:168:30:38
HPE>pwr unit 1
E000
PDU UNIT 1 power Feature
voltage: 0V
current: 0.0A
active power: 0W
apparent power: 0W
power factor: 0.00
energy: 0.000kWh
pwr phase [idx]
Description
Query specified phase electric information.
Example output
HPE>pwr phase 1
E000
PDU PHASE 1 power Feature
voltage: 0V
current: 0.0A
active power: 0W
apparent power: 0W
Appendix 141