HP HPE G2 Series User Manual page 155

Trap class
Trap warning
Trap codes assigned for information alarms
Trap class
Trap code Description
213
The phase 3 current is BELOW warning threshold value.
214-225
The circuit breaker (1~12) current is ABOVE warning threshold
value.
226-237
The circuit breaker (1~12) current is BELOW warning threshold
value.
238-249
The circuit breaker (1~12) is in OFF state.
250-297
The outlet (1~48) active power is ABOVE warning threshold
value.
298-345
The outlet (1~48) active power is BELOW warning threshold
value.
346-350
The sensor 1~5 temperature/humidity is ABOVE warning
threshold value.
351-355
The sensor 1~5 temperature/humidity is BELOW warning
threshold value.
356-379 Reserved
Trap code Description
380-391
The circuit breaker 1~12 is in ON state.
392-439
The outlet 1~48 IMMEDIATE ON occurred.
440-487
The outlet 1~48 DELAYED ON occurred.
488-535
The outlet 1~48 IMMEDIATE OFF occurred.
536-583
The outlet 1~48 DELAYED OFF occurred.
584-631
The outlet 1~48 IMMEDIATE REBOOT occurred.
632-679
The outlet 1~48 DELAYED REBOOT occurred.
680-727
The outlet 1~48 Cancel Pending Commands occurred.
728-739 Reserved.
740 Event log cleared.
Table Continued
Appendix 155