HP HPE G2 Series User Manual page 57

displayed on setting and configuration dialog boxes. Before setting up users, determine the Roles that will be
required. Each user must be assigned a Role, which defines the permissions granted to the user.
Role
Full
Read-only
Customized
User Accounts
The User Settings page lets you add a new user/role, configure LDAP and RADIUS, set session
management, change the temperature units, and set the password policy.
IMPORTANT: LDAP and RADIUS cannot be configured at the same time.
To access User Settings, select Admin > User Accounts.
Adding a user
Procedure
1. On the User Settings page, click Add User in the top right corner.
2. Add a user name, set the password, select the desired role, and click Save.
The changes are displayed in the Users list.
Default permissions
Full permissions that cannot be modified or deleted.
Limited permissions that can be modified or deleted. By default, these permissions
include the following:
• Change Input Phase Setting
• Change Circuit Breaker Setting
• Change Outlet Setting
• Change Own Password
• Change Event Settings
Permissions for user customized roles can be set as needed.
Remote configuration 57