Set The Audio; Using Black Out - RGBlink VENUS X1 Quick Start Manual

Hide thumbs Also See for VENUS X1:

Table of Contents

BOTTOM LEFT OUT, WIPE BOTTOM RIGHT IN, WIPE BOTTOM LEFT OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE

RIGHT IN, WIPE RIGHT OUT, WIPE TOP IN, WIPE TOP OUT, WIPE BOTTOM IN and WIPE BOTTOM OUT.

FADE TIME: Switch time setting. Turn the rotary knob to select the fade time and push the knob to confirm. The

switching time ranges from 0 to 3S.

ALPHA: Set the image transparency, the adjustment range is 0 to 16.

Set the Audio

Push the [MENU] button, the OLED module show the menu items, turn the knob, and choose <AUDIO>, push

the knob to confirm. Audio menu shown as follows:

MUTE: User can enable or disable the mute function.

VOLUME: Volume adjustment, the adjust range is 0~100.

AUDIO IN: Can choose audio input source for IMAGE A or IMAGE B.

HDMI/EXT AUDIO: Choose internal or external audio for HMDI/EXT.

INPUT AUDIO COFIG: The input audio includes: CV1, VGA, DVI, HDMI and M_8_SDI. Input audio 1 can select

any input except the inputs of input audio 2 and input audio 3. Input audio 2 can choose any input except the

inputs of input audio 1 and input audio 3. Input audio 3 can select any input except the inputs of input audio 1

and input audio 2.

Black out descriptions:

Black signal realizes one-key-touch to a black screen.

VENUS X1 provides black effect processing for output with cut black effect. Operation is as below:

Push the [BLACK/0] button, then output will cut to BLACK, shown as below:

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197

Fax: 00865925788216

Email: sales@rgblink.com

http://www.rgblink.cn

Table of Contents