Expansion Card -Synqnet; Front View; Node Id Switch; Node Led Table - Beckhoff AX2040 Assembly, Installation, Setup

Expansions, accessories
6.1.7

Expansion card -SYNQNET-

This section describes the SynqNet expansion card for AX2040/2070.
Information on the range of functions and the software protocol can be found in the SynqNet docu-
mentation..
6.1.7.1

Front view

6.1.7.2

NODE ID Switch

With these hexadecimal switches you can set the main and low significant bytes of the Node ID
seperately. SynqNet does not require an address for correct operation in the network, however in
some machines this can be a convenient way of identifying build options to the application program.
6.1.7.3

Node LED table

LED#
LED1
LED2
LED3
LED4
6.1.7.4

SynqNet Connection, Connector X21B/C (RJ-45)

Connection to the SynqNet network via RJ-45 connectors (IN and OUT ports) with integrated LEDs.
84
02/06
Name Function
ON = receive valid (IN port)
LINK_IN
OFF= not valid, power off, or reset.
ON = network cyclic
CYCLIC BLINK = network not cyclic
OFF = power off, or reset
ON = receive valid (OUT port)
LINK_OUT
OFF = not valid, power off, or reset
ON = repeater on, network cyclic
REPEATER BLINK = repeater on, network not cyclic
OFF = repeater off, power off, or reset
LED2 LED1
AX2040/2070 Installation Manual
Beckhoff
LED4 LED3